Drain Cleaning Nozzles perform the tough job of dislodging blockages in a drain or sewer pipe. Attached to the end of a hose, these jetting nozzles are fed into the drain where they blow the debris down the pipe where it can be removed.

Similarly, Tube Cleaning Nozzles are used to remove deposit build-up, such as soot and scale.

Hawk offers a variety of jetting nozzles that are designed to perform many different tasks. In addition to the nozzles displayed on this page, Hawk is able to source other nozzles that may be needed.Hawk offers a wide range of local and imported tube, drain and sewer cleaning nozzles

Drain Cleaning Nozzles 1/4 Bsp M in Stainless Steel

Drain Cleaning Nozzles 1/4 BspM in Stainless Steel

Model

5C-25.1201.51

Rated Pressure

250bar

Inlet

1/4BspM

Nozzle Size

04

Forward Jets

1

Backward Jets

3 at 45°

Drain Cleaning Nozzles 3/8 Bsp M in Stainless Steel

Drain Cleaning Nozzles 3/8 BspM in Stainless Steel

Model

5C-25.1210.51

Rated Pressure

250bar

Inlet

3/8BspM

Nozzle Size

06

Forward Jets

1

Backward Jets

8 at 45°

Sand Sleigh Nozzles in Stainless Steel for Storm Water Drains

Sewer Cleaning Nozzles - Sand Sleigh

Model

5NC-LSAND01

Pressure

350bar

Inlet

1/2″

No. of Ports

4

  • Used for removal of sand
  • Top & bottom plates are thick to give the body enough weight to stop it from tumbling in the pipe
  • Backward facing jets spray slightly downwards, agitating and fluidizing the sand
  • The center 2 nozzles spray straight back while outer 2 face slightly outwards to cover a wide area
  • In the center of the nozzle manifold is a ½” swivel so that with any twisting of the hose, the nozzle will always remain flat
  • The front end is thicker than the rear and the wedge shape causes the nozzle to ride up over the surface of the sand.
  • The symmetry of the shape of the nozzle enables it to work upside down as well

Flail Sewer Cleaning Nozzles with Chains, Front Cutter & Box

Sewer Cleaning Nozzles - Flail - Standard Chain

Standard Chain

Sewer Cleaning Nozzles - Flail - Link Chain

Link Chain

Model

5NC-LFLAIL-KIT

Pressure

250bar

Inlet

1/2″

No. of Ports

6

  • Made from Stainless Steel
  • Rotating Retro nozzle and spinner for sewer cleaning
  • Includes body and head kit

Rotating Cutter Drain Cleaning Nozzles

Rotating Cutter Drain Cleaning Nozzles

Model

5C-25.1246.20L

Pressure

300bar

Inlet

1/2BspF

No. of Ports

10

  • Nozzle is made from Stainless Steel
  • Milling cutters and chain flail cutters for sewers blocked with debris and roots
  • Includes chains, front cutter and box
  • Standard nozzle has a standard chain but there is an option for a version with a link chain

Retro Bomb Sewer Cleaning Nozzles

Local Drain Cleaning Nozzles

Model

Pressure

No. of Ports

Inlet

Material

5C-25.1235.00L

250bar

4

3/8BspF

Nickel-plated, Hardened Steel

5C-25.1236.00L

250bar

7 (with inserts)

1/2BspF

Nickel-plated, Hardened Steel

5C-25.1237.00L

250bar

7 (with inserts)

3/4BspF

Nickel-plated, Hardened Steel

5C-25.1239.00L

250bar

7 (with inserts)

1BspF

Hardened Steel

RR Rotating Drain Cleaning Nozzles – Cutting Head

RR20 Rotating Drain Cleaning Nozzles Cutting Head

10 x Inter-changeable Stainless Steel Nozzles

Model

Nozzle Size

Weight

5C-25.1246.00

5C-25.1246.20

5C-25.1246.30

20

30

310g

327g

330g

Rated Pressure

Inlet

Material

300bar

1/2BspM

Stainless Steel (Tempered & hardened)

Side Jets

Backward Jets

Rotation Direction

4 Ports at 180°

6 Ports at 180°

Anti Clockwise

Flunder Sewer Cleaning Nozzles

Flunder Sewer Cleaning Nozzles

Model

Pressure

Inlet

No. of Ports

Weight

B0702

350bar

3/4″

4

6kg

  • Wedge-shaped flat sewer cleaning nozzle
  • Jet direction, and thus all power, is concentrated on the sewer invert
  • Used for heavy, sandy or stone-like deposits
  • Water deflection in the thrust part provides optimum pressure characteristics
  • Flunder nozzle should be used with rotation joints
  • Flat-stream can be used

Turbobomb Pipe Cleaning Nozzles

Pipe Cleaning Nozzles - Turbo Bomb

Model

Pressure

Inlet

No. of Ports

Weight

B0305

350bar

1″

10

4.3kg

  • Powerful pipe cleaning nozzles with 2 different stream angles
  • Nozzle is 2-in-1: removes grease and makes great job before CCTV
  • Turbobomb nozzle should be used with rotation joints

G50 Granat Nozzles

G50 Granat Nozzles

Model

Pressure

Inlet

No. of Ports

Weight

B0501

350bar

1/2BspF

2.3kg

7

  • Extremely power with high pressure and outstanding cleaning performance
  • Suitable for all purposes – ideal for long reaches
  • 1 Front port (forward jet)
  • 6 Back ports at 30° (backward jets)

Combination Nozzles

Combination Nozzles
  • Constructed from Stainless Steel
  • Powerful and efficient cutting/milling nozzles for all purposes
  • Have alternating jet angles and therefore provide optimal pressure and cleaning capability
  • Combines the positive capabilities of the Bomb Nozzle and the Granat Nozzle
  • Can be used with a flatjet
  • 1 Front port for forward thrust
  • 5 or 6 Back ports (depending on model)

Model

B0801

B0802

No. of Ports

7

6

Rated Pressure

Inlet

Weight

350bar

1/2BspF

1kg

KR Sewer & Pipe Cleaning Nozzles for Water Recycling

KR Sewer Cleaning Nozzles for Water Recycling
  • Suitable for recycling water
  • Durable sewer and pipe cleaning nozzles supplied with ceramic inserts
  • Constructed from hardened steel (stainless steel available on request)
  • 1 Front port for forward jet
  • 6 or 8 Back ports at 20° (depending on model)

Model

B3801

B3802

No. of Ports

7

9

Rated Pressure

Inlet

Weight

350bar

1/2BspF

150g

KR Sewer & Pipe Cleaning Nozzles

KR Sewer Cleaning Nozzles
  • Durable sewer and pipe cleaning nozzle with wrench flats at the connection
  • Constructed from hardened steel (also available in stainless steel)
  • Suitable for removing mud deposits and obstructions
  • 1 Front port (forward jet)
  • 6 or 8 Back ports (backward jets) depending on the model

Model

B1101

B1102

B1103

B1104

No. of Ports

7

9

7

9

Rated Pressure

Inlet

Weight

350bar

1/2BspF

150g or 200g

KR Sewer & Pipe Cleaning Nozzles in Stainless Steel

KR Sewer Cleaning Nozzles

Model

Volume

Pressure

Inlet

Nozzle Size

Weight

B1154-40-140

40 L/min

140bar

1/2Bsp

15

90g

  • Suitable for recycling water
  • Durable sewer and pipe cleaning nozzles supplied with ceramic inserts
  • Constructed from hardened steel (stainless steel available on request)
  • 1 Front port for forward jet
  • 6 or 8 Back ports at 20° (depending on model)

Aquadrill Nozzles

Aquadrill Pipe Cleaning Nozzles

Model

Pressure

Inlet

No. of Ports

Weight

B0624

350bar

1/2BspF

6

350g

  • Powerful front stream rotation nozzle with ceramic insert
  • Suitable for 60°C water temperature
  • This cutting/milling nozzle is specifically designed for completely blocked pipes to remove grease in fall pipes
  • Spinning driller front-jet of this nozzle produces a double impact by combining the energy of a driller and the front-jet feature of a rodding nozzle
  • Needs only 25 % of the total water, resulting in more water available for traction / cleaning and removal

Hurricane Rotating Drain Cleaning Nozzles

Hurricane Rotating Drain Cleaning Nozzles

Model

Pressure

Inlet

No. of Ports

Weight

B9998

350bar

1/2BspF

13

3.1kg

  • High performance rotation cutting/milling nozzle provides very good cleaning
  • Strategically based rear-jets result in high pulling power
  • Ideal for circular cleaning and before camera inspection
  • Hurricane Nozzle should be used with rotation joints
  • 1 Front port
  • 6 Rear ports
  • 6 ROS ports

Long Throw Nozzles

Long Throw Nozzles

Model

Pressure

Inlet

No. of Ports

Weight

B1401-30

350bar

1/4″

Drilled Inserts

3.1kg

  • High performance cutting/milling nozzle
  • Made from stainless steel
  • Solid or flat stream nozzles

Aqua Twister Drain Cleaning Nozzles

Aqua Twister Drain Cleaning Nozzles

Aqua Twister Drain Cleaning Nozzles Stream Patterns - Thumbnail

Click on Image to View Stream Patterns

  • The Aqua Twister high-pressure rotation nozzles are made from hardened steel and have drilled jets in various angles with forward-jets and/or back-jets, and can be used with high pressure hoses or lances
  • Each versatile nozzle has up to 12 different stream patterns and are suitable for heavy-duty pipe cleaning applications such as for heat exchangers and evaporator work

Model

B9022-1-18-300

B9022-1-19-350

B9022-1-21-350

B9022-1-27-500

B9022-1-40-140

B9022-1-70-200

Volume

70 L/min

40 L/min

27 L/min

21 L/min

19 L/min

18 L/min

Pressure

300bar

350bar

350bar

500bar

200bar

140bar

Nozzle Size

045

045

05

053

15

20

Inlet

3/8BspF

3/8BspF

3/8BspF

3/8BspF

3/8BspF

3/8BspF

Chisel Rodding Nozzles

Chisel Rodding Drain Cleaning Nozzles

Model

Pressure

Inlet

No. of Ports

Weight

B3903

350bar

3/4″

12

300g

  • Powerful cutting/milling nozzle
  • Suitable for recycling water
  • With ceramic inserts for stale and dirty water
  • 4 Front ports at angles of 0°/15°
  • 8 Back ports at angles of 25°
Quick Links
Custom Design

Hawk have an enviable reputation for being able to custom design solutions for local problems. All equipment is manufactured at the Durban factory where quality and practicality are always considered. The resulting solutions are designed to be robust enough for the tough African market.

Our Guarantee

Precision engineering and the use of high quality materials have enabled Hawk in South Africa to give a comprehensive guarantee to cover their products. A full one year’s warranty covers the workmanship and materials against defects (excluding wear and tear items) on all manufactured units.

Non-foaming Oil

Hawk Non-Foaming OilHawk Oil has been developed in conjunction with a leading oil manufacturer for the Hawk range of high pressure piston pumps. The Hawk oil is non-foaming, thereby reducing the amount of bubbles in the oil, and the amount of air in the bearings. This in turn increases the lubricating properties of the oil. The lack of emulsifiers in the oil reduces its ability to become milky in humid conditions.