Hawk offers a wide range of high pressure spray guns and lances for an array of industrial cleaning applications.
High Pressure Spray Guns
Black GunJets
Model
5H-2404.11
Max Volume
40L/min
Max Pressure
250bar
Max Temp
150°C
Red Eco GunJets
Model
5H-2404.25
Max Volume
40L/min
Max Pressure
250bar
Max Temp
150°C
Blue GunJets
Model
5H-2404.20
Max Volume
30L/min
Max Pressure
310bar
Max Temp
150°C
Vega Spray Guns
Model
5C-30.2000.00
Max Volume
40L/min
Max Pressure
310bar
Max Temp
90/160°C
- Covered by shockproof plastic semi-housings
- Stainless steel seat and ball
- Internal structure in brass and stainless steel
- Designed for continuous use at water temperature of 90°C – can resist at max temperature of 160°C for short periods
Nova 400 Spray Guns
Model
5C-30.5650.50
Max Volume
40L/min
Max Pressure
400bar
Max Temp
60/100°C
- Covered by shockproof plastic semi-housings
- Stainless Steel seat and ball
- Internal structure in stainless steel
- Designed for continuous use at water temperature of 60° – can resist at max temperature of 160°C for short periods
RL51 Spray Guns
Model
5C-30.4100.10
Max Volume
50L/min
Max Pressure
350bar
Max Temp
160°C
- Covered by shockproof plastic semi-housings
- Stainless steel seat and ball.
- Internal structure in brass and stainless steel
- Ergonomic design
- New mechanical device with double connecting rods to guarantee less strain when opening and holding
- New trigger design, rotating on a fixed pin to guarantee better mobility and steadiness
RL84 Spray Guns
Model
5C-30.5400.00
Max Volume
80L/min
Max Pressure
500bar
Max Temp
60/100°C
- Covered by shockproof plastic semi-housings
- Sturdy construction of stainless steel & brass with dynamic teflon seals
- Assembly on hoses equipped with G 1/2” fittings
- Ergonomic design
RL124 Spray Guns
Model
5C-30.5300.00
Max Volume
120L/min
Max Pressure
120bar
Max Temp
60/100°C
- Covered by shockproof plastic semi-housings
- Seat and ball in stainless steel
- Manufactured from stainless steel with body in brass
- Assembly on hoses equipped with G 1/2” fittings
- Ergonomic construction
RL204 Spray Guns
Model
5C-30.5200.00
Max Volume
200L/min
Max Pressure
200bar
Max Temp
60/100°C
- Covered by shockproof plastic semi-housings
- Sturdy construction of stainless steel & brass with dynamic Teflon seals
- Seat and shutter pin in stainless steel
- Assembly on hoses equipped with G 3/4 fittings
- Ergonomic design
RB65 Spray Guns
(for Food Industry)
Model
5C-30.6400.00
Max Volume
60L/min
Max Pressure
24bar
Max Temp
60/90°C
- Low pressure gun with conical/pencil jet controlled by the trigger
- Adjustable screw to vary cone width from 0° to 60°
- Covered by semi-housings of non-stain-able shockproof
- plastic,entirely sealed and with 3 rubber protective rings
- Plastic trigger protected by hand guard.
- Internal structure in brass and stainless steel
- Ergonomic design
- Inlet swivel connection available on request
Tubes
Lance Tubes 1/4 Bsp MM
Model
Length
Max Volume
Max Pressure
Material
5C-40.5050.66
300mm
40L/min
250bar
Zinc-plated
5C-40.5051.56
300mm
40L/min
250bar
Stainless Steel
Image
unavailable
at present
Lance Tubes 500bar
Model
Length
Max Pressure
Material
5Z-LANCE1M-500BAR
1m
500bar
Stainless Steel
Lances with Handles
Image
unavailable
at present
Local Lances
Model
Length
Max Pressure
Material
5Z-LANCE1M
1m
+300bar
Stainless Steel
5Z-LANCE1.5M
1.5m
+300bar
Stainless Steel
5Z-LANCE2M
2m
+300bar
Stainless Steel
Lances with Insulated Hand Grip
Model
Length
Max Volume
Max Pressure
Material
5C-40.5453.00
430mm
40L/min
250bar
Zinc-plated
Lances with Round Grip, Tip Protector & Nozzle Holder
Model
Length
Max Volume
Max Pressure
Material
5C-40.2170.00
700mm
40L/min
250bar
Zinc-plated
5C-40.2190.00
900mm
40L/min
250bar
Zinc-plated
Foaming Lances
Foaming Lances
Model
Max Volume
Max Pressure
Material
5C-40.5453.00
25L/min
200bar
Stainless Steel & Brass
Gun Holsters
Gun Holsters allow the operator to conveniently store the gun and lance while it is not in use, protecting it from possible damage. Most car and truck wash operators have at some time experienced a vehicle driving over a gun and destroying it.
There are wall mount and floor mount versions available. Made of polished stainless steel to last longer, they also look good and professional.
In addition to the floor and wall mounted versions, holsters can be attached to certain high pressure washer chassis’ including trolleys, trailers & cabinet units
.
Floor-mounted Gun Holster
Wall-mounted Gun Holster
Quick Links
Custom Design
Hawk have an enviable reputation for being able to custom design solutions for local problems. All equipment is manufactured at the Durban factory where quality and practicality are always considered. The resulting solutions are designed to be robust enough for the tough African market.
Our Guarantee
Precision engineering and the use of high quality materials have enabled Hawk in South Africa to give a comprehensive guarantee to cover their products. A full one year’s warranty covers the workmanship and materials against defects (excluding wear and tear items) on all manufactured units.
Non-foaming Oil
Hawk Oil has been developed in conjunction with a leading oil manufacturer for the Hawk range of high pressure piston pumps. The Hawk oil is non-foaming, thereby reducing the amount of bubbles in the oil, and the amount of air in the bearings. This in turn increases the lubricating properties of the oil. The lack of emulsifiers in the oil reduces its ability to become milky in humid conditions.