Drain Cleaning Nozzles perform the tough job of dislodging blockages in a drain or sewer pipe. Attached to the end of a hose, these jetting nozzles are fed into the drain where they blow the debris down the pipe where it can be removed.
Similarly, Tube Cleaning Nozzles are used to remove deposit build-up, such as soot and scale.
Hawk offers a variety of jetting nozzles that are designed to perform many different tasks. In addition to the nozzles displayed on this page, Hawk is able to source other nozzles that may be needed. Hawk offers a wide range of local and imported tube, drain and sewer cleaning nozzles.
STANDARD NOZZLES
1/4 bspm Drain Cleaning Nozzles
| MODEL | PRESSURE | INLET | NOZZLE SIZE | FORWARD JETS | BACKWARD JETS | MATERIAL |
|---|---|---|---|---|---|---|
| 5C-25.1201.51 | 250bar | 1/4 BSPM | 4 | 1 | 3 at 45° | Stainless Steel |
3/8 bspm Drain Cleaning Nozzles
| MODEL | PRESSURE | INLET | NOZZLE SIZE | FORWARD JETS | BACKWARD JETS | MATERIAL |
|---|---|---|---|---|---|---|
| 5C-25.1210.51 | 250bar | 3/8 BSPM | 6 | 1 | 8 at 45° | Stainless Steel |
LOCAL NOZZLES
Sand Sleigh Nozzles for Storm Water Drains
Features
- Used for removal of sand
- Top & bottom plates are thick to give the body enough weight to stop it from tumbling in the pipe
- Backward facing jets spray slightly downwards, agitating and fluidizing the sand
- The center 2 nozzles spray straight back while outer 2 face slightly outwards to cover a wide area
- In the center of the nozzle manifold is a ½” swivel so that with any twisting of the hose, the nozzle will always remain flat
- The front end is thicker than the rear and the wedge shape causes the nozzle to ride up over the surface of the sand.
- The symmetry of the shape of the nozzle enables it to work upside down as well
| MODEL | PRESSURE | INLET | NO. OF PORTS | MATERIAL |
|---|---|---|---|---|
| 5NC-LSAND01 | 350bar | 1/2″ | 4 | Stainless Steel |
Flail Nozzles with Chains, Front Cutter & Box for Sewer Cleaning
Features
- Rotating Retro nozzle and spinner for sewer cleaning
- Includes body and head kit
| MODEL | PRESSURE | INLET | NO. OF PORTS | MATERIAL |
|---|---|---|---|---|
| 5NC-LFLAIL-KIT | 250bar | 1/2″ | 6 | Stainless Steel |
Rotating Cutter Nozzles for Drain Cleaning
Features
- Milling cutters and chain flail cutters for sewers blocked with debris and roots
- Includes chains, front cutter and box
- Standard nozzle has a standard chain but there is an option for a version with a link chain
| MODEL | PRESSURE | INLET | NO. OF PORTS | MATERIAL |
|---|---|---|---|---|
| 5C-25.1246.20L | 300bar | 1/2 BSPF | 10 | Stainless Steel |
Retro Bomb Nozzles for Sewer Cleaning
| MODEL | PRESSURE | INLET | NO. OF PORTS | MATERIAL |
|---|---|---|---|---|
| 5C-25.1235.00L | 250bar | 4 | 3/8 BSPF | Nickel-Plated, Hardened Steel |
| 5C-25.1236.00L | 250bar | 7 (with inserts) | 1/2 BSPF | Nickel-Plated, Hardened Steel |
| 5C-25.1237.00L | 250bar | 7 (with inserts) | 3/4 BSPF | Nickel-Plated, Hardened Steel |
| 5C-25.1239.00L | 250bar | 7 (with inserts) | 1 BSPF | Hardened Steel |
SPECIAL IMPORT NOZZLES
RR Rotating Cutting Head Drain Cleaning Nozzles
- 10 x Inter-changeable Stainless Steel Nozzles
- Stainless Steel (Tempered & hardened)
- Anti Clockwise Rotation
| MODEL | NOZZLE SIZE | WEIGHT | PRESSURE | INLET | SIDE JETS | BACKWARD JETS |
|---|---|---|---|---|---|---|
| 5C-25.1246.00 | – | 310g | 300bar | 1/2 BSPM | 4 at 180° | 6 at 180° |
| 5C-25.1246.20 | 20 | 327g | 300bar | 1/2 BSPM | 4 at 180° | 6 at 180° |
| 5C-25.1246.30 | 30 | 330g | 300bar | 1/2 BSPM | 4 at 180° | 6 at 180° |
Flunder Sewer Cleaning Nozzles
Features
- Wedge-shaped flat sewer cleaning nozzle
- Jet direction, and thus all power, is concentrated on the sewer invert
- Used for heavy, sandy or stone-like deposits
- Water deflection in the thrust part provides optimum pressure characteristics
- Flunder nozzle should be used with rotation joints
- Flat-stream can be used
| MODEL | PRESSURE | INLET | NO. OF PORTS | WEIGHT |
|---|---|---|---|---|
| B0702 | 350bar | 3/4″ | 4 | 6kg |
Turbobomb Pipe Cleaning Nozzles
Features
- Powerful pipe cleaning nozzles with 2 different stream angles
- Nozzle is 2-in-1: removes grease and makes great job before CCTV
- Turbobomb nozzle should be used with rotation joints
| MODEL | PRESSURE | INLET | NO. OF PORTS | WEIGHT |
|---|---|---|---|---|
| B0305 | 350bar | 1″ | 10 | 4.3kg |
G50 Granat Nozzles
Features
- Extremely power with high pressure and outstanding cleaning performance
- Suitable for all purposes – ideal for long reaches
- 1 Front port (forward jet)
- 6 Back ports at 30° (backward jets)
| MODEL | PRESSURE | INLET | NO. OF PORTS | WEIGHT |
|---|---|---|---|---|
| B0501 | 350bar | 1/2 BSPF | 7 | 2.3kg |
Combination Nozzles
Features
- Constructed from Stainless Steel
- Powerful and efficient cutting/milling nozzles for all purposes
- Have alternating jet angles and therefore provide optimal pressure and cleaning capability
- Combines the positive capabilities of the Bomb Nozzle and the Granat Nozzle
- Can be used with a flatjet
- 1 Front port for forward thrust
- 5 or 6 Back ports (depending on model)
| MODEL | PRESSURE | INLET | NO. OF PORTS | WEIGHT |
|---|---|---|---|---|
| B0801 | 350bar | 1/2 BSPF | 7 | 1kg |
| B0802 | 350bar | 1/2 BSPF | 6 | 1kg |
KR Sewer & Pipe Cleaning Nozzles for Water Recycling
Features
- Suitable for recycling water
- Durable sewer and pipe cleaning nozzles supplied with ceramic inserts
- Constructed from hardened steel (stainless steel available on request)
- 1 Front port for forward jet
- 6 or 8 Back ports at 20° (depending on model)
| MODEL | PRESSURE | INLET | NO. OF PORTS | WEIGHT |
|---|---|---|---|---|
| B3801 | 350bar | 1/2 BSPF | 7 | 150g |
| B3802 | 350bar | 1/2 BSPF | 9 | 150g |
KR Sewer & Pipe Cleaning Nozzles
Features
- Durable sewer and pipe cleaning nozzle with wrench flats at the connection
- Constructed from hardened steel (also available in stainless steel)
- Suitable for removing mud deposits and obstructions
- 1 Front port (forward jet)
- 6 or 8 Back ports (backward jets) depending on the model
| MODEL | PRESSURE | INLET | NO. OF PORTS | WEIGHT |
|---|---|---|---|---|
| B1101 | 350bar | 1/2 BSPF | 7 | 150g or 200g |
| B1102 | 350bar | 1/2 BSPF | 9 | 150g or 200g |
| B1103 | 350bar | 1/2 BSPF | 7 | 150g or 200g |
| B1104 | 350bar | 1/2 BSPF | 9 | 150g or 200g |
KR Sewer & Pipe Cleaning Nozzles in Stainless Steel
Features
- Suitable for recycling water
- Durable sewer and pipe cleaning nozzles supplied with ceramic inserts
- Constructed from hardened steel (stainless steel available on request)
- 1 Front port for forward jet
- 6 or 8 Back ports at 20° (depending on model)
| MODEL | FLOWRATE | PRESSURE | INLET | NOZZLE SIZE | WEIGHT |
|---|---|---|---|---|---|
| B1154-40-140 | 40 L/min | 140bar | 1/2 BSP | 15 | 90g |
Aquadrill Nozzles
Features
- Powerful front stream rotation nozzle with ceramic insert
- Suitable for 60°C water temperature
- This cutting/milling nozzle is specifically designed for completely blocked pipes to remove grease in fall pipes
- Spinning driller front-jet of this nozzle produces a double impact by combining the energy of a driller and the front-jet feature of a rodding nozzle
- Needs only 25% of the total water, resulting in more water available for traction / cleaning and removal
| MODEL | PRESSURE | INLET | NO. OF PORTS | WEIGHT |
|---|---|---|---|---|
| B0624 | 350bar | 1/2 BSPF | 6 | 350g |
Hurricane Rotating Drain Cleaning Nozzles
Features
- High performance rotation cutting/milling nozzle provides very good cleaning
- Strategically based rear-jets result in high pulling power
- Ideal for circular cleaning and before camera inspection
- Hurricane Nozzle should be used with rotation joints
- 1 Front port
- 6 Rear ports
- 6 ROS ports
| MODEL | PRESSURE | INLET | NO. OF PORTS | WEIGHT |
|---|---|---|---|---|
| B9998 | 350bar | 1/2 BSPF | 13 | 3.1kg |
Long Throw Nozzles
Features
- High performance cutting/milling nozzle
- Made from stainless steel
- Solid or flat stream nozzles
| MODEL | PRESSURE | INLET | NO. OF PORTS | WEIGHT |
|---|---|---|---|---|
| B1401-30 | 350bar | 1/4″ | Drilled Inserts | 3.1kg |
Aqua Twister Drain Cleaning Nozzles
Features
- The Aqua Twister high-pressure rotation nozzles are made from hardened steel and have drilled jets in various angles with forward-jets and/or back-jets, and can be used with high pressure hoses or lances
- Each versatile nozzle has up to 12 different stream patterns and are suitable for heavy-duty pipe cleaning applications such as for heat exchangers and evaporator work
| MODEL | FLOWRATE | PRESSURE | NOZZLE SIZE | INLET |
|---|---|---|---|---|
| B9022-1-18-300 | 70 L/min | 300bar | 045 | 3/8 BSPF |
| B9022-1-19-350 | 40 L/min | 350bar | 045 | 3/8 BSPF |
| B9022-1-21-350 | 27 L/min | 350bar | 05 | 3/8 BSPF |
| B9022-1-27-500 | 21 L/min | 500bar | 053 | 3/8 BSPF |
| B9022-1-40-140 | 19 L/min | 200bar | 15 | 3/8 BSPF |
| B9022-1-70-200 | 18 L/min | 140bar | 20 | 3/8 BSPF |
Chisel Rodding Nozzles
Features
- Powerful cutting/milling nozzle
- Suitable for recycling water
- With ceramic inserts for stale and dirty water
- 4 Front ports at angles of 0°/15°
- 8 Back ports at angles of 25°
| MODEL | PRESSURE | INLET | NO. OF PORTS | WEIGHT |
|---|---|---|---|---|
| B3903 | 350bar | 3/4″ | 12 | 300g |
JOIN OUR NEWSLETTER
Receive product updates, industry news, and insightful content in our quarterly newsletter.